Chemical reagents 2-Aminoethanol liquid colorless viscous

Short Description:

2-Aminoethanol 

2-Aminoethanol is 2-Hydroxyethylamine,is an organic compound and the chemical formula is C2H7NO.

Chemical formula: C2H7NO

Particular weight: 61.083

CAS: 141-43-5

EINECS:  205-483-3

Melting point: 10℃~ 11 ℃

Boiling point: 170.9 ℃

Water soluble: miscible with water

Density: 1.02 g/cm³

Appearance: Colorless transparent viscous liquid

Flash point: 93.3 ℃

Application: Chemical reagents, solvents, emulsifiers, rubber accelerators, corrosion inhibitors, degradation agents, etc.

 


Product Detail

Product Tags

Appearance: Colorless transparent viscous liquid

Flash point: 93.3 ℃

Application: Chemical reagents, solvents, emulsifiers, rubber accelerators, corrosion inhibitors, degradation agents, etc.

Safe description: S26;S36/S37/S39;S45

Hazard Symbols: C

Hazard description: R20/21/22;R34

UN No.: 2924

logP:-1.31

Refractive index: 1.435

Solubility: miscible with water, ethanol and acetone, slightly soluble in ether and carbon tetrachloride

Molecular structure data

Molar Refractive Index: 16.38

2-aminoethanol-2 2-aminoethanol-3

Technical data

Item

Standard

Total amine (as 2-Aminoethanol)  %

≥99.5

Moisture  %

≤0.5

Diethanolamine+Triethanolamine content  %

As the result

Chroma (Hazen platinum-cobalt color number)

≤25

Distillation experiment (0℃,101325KP,168℃–174℃,distillation volume  ml)

≥95

Density, p20℃,g/cm3

1.014–1.019

2-aminoethanol-4 2-aminoethanol-5

Application

Also used as acid gas absorbent, emulsifier, plasticizer, rubber vulcanizing agent, printing and dyeing whitening agent, fabric mothproofing agent, etc. It can also be used as plasticizer, vulcanizing agent, accelerator and foaming agent for synthetic resins and rubber, as well as intermediates for pesticides, medicines and dyes.It is also a raw material for synthetic detergents and cosmetic emulsifiers. Textile industry as printing and dyeing whitening agent, antistatic agent, moth repellant, detergent.

cifite collection2

Factory base show

factory collection factoye10 collection factory3 collection factory collection4

Emergency treatment

Evacuate personnel from the leaked contaminated area to a safe area, and prohibit irrelevant personnel from entering the contaminated area. It is recommended that emergency responders wear gas masks and chemical protective clothing.Do not touch the leak directly and stop the leak when it is safe to do so.Mix and absorb with sand or other non-combustible adsorbents, then collect and transport to waste disposal sites for disposal.It can also be rinsed with a large amount of water, and the diluted rinse water can be put into the waste water system.If there is a large amount of leakage, use the embankment to contain it, then collect, transfer, recycle or waste it after harmless treatment.


  • Previous:
  • Next:

  • Write your message here and send it to us