Soluble in most organic solvents MMA methyl methacrylate liquid
Flash point: 8 ℃
Physical and Chemical properties
Density: 0.943 g/cm3
Melting point: -48℃
Boiling point: 100℃
Flash point: 8℃
Critical temperature: 294℃
Critical pressure: 3.3MPa
Saturated vapor pressure: 3.9kPa(20℃)
Explosion ceiling (V/V): 12.5%
Lower explosion limit (V/V): 2.1%
Solubility: slightly soluble in water, soluble in most organic solvents such as ethanol
Technical data
Item |
Excellent grade |
First grade |
Qualified product |
Appearance |
Colorless transparent liquid,no visible impurities |
||
Chroma (Platinum Cobalt)/hazen |
≤5 |
≤10 |
≤20 |
Density(p20) g/cm3 |
0.942–0.944 |
0.942–0.946 |
0.938–0.948 |
Acidity(as methacrylic acid) mg/kg |
≤50 |
≤100 |
≤300 |
Moisture mg/kg |
≤400 |
≤600 |
≤800 |
Methyl methacrylate w/% |
≥99.9 |
≥99.8 |
≥99.5 |
2,4 dimethyl 6-tert-butylphenol mg/kg |
—- |
—- |
—- |
Toxicological data
- Acute toxicity
LD50:7872mg/kg(to mouth for rat)
LC50:78000mg/m3(suck in for rat,4h)
- Subacute and Chronic Toxicity
Dogs inhaled 11700ppm, 1.5h a day, a total of 8 days, can cause animal death, autopsy showed liver and kidney steatosis.
- Mutagenicity
Cytogenetic analysis: mouse lymphocytes 2202 mg/L.
- Teratogenicity
Rat inhalation of the lowest toxic dose (TCLo) 109g/m3 (17min) 6~15d after pregnancy caused developmental malformations of the musculoskeletal system.
- Others
Rat inhalation minimum toxic concentration (TCLo): 109g/kg (medicated for 6~15d of pregnancy), causing embryotoxicity and affecting the musculoskeletal system.
Operation notice: closed operation, strengthen ventilation.Operators must undergo special training and strictly abide by operating procedures.It is recommended that operators wear self-priming filter respirators (half masks), chemical safety goggles, anti-static work clothes and rubber oil-resistant gloves.Keep away from fire and heat sources, and smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment.Use explosion-proof ventilation systems and equipment. Prevent vapors from leaking into the workplace air.Avoid contact with oxidants, acids, bases, halogens.